1/4 inch dry walling bit holder
RECA drywall bit holder 1/4 inch
Register now and access more than 15,000 products
High-quality bit spacer with aluminium sleeve and strong permanent magnet for use in dry walling and interior construction.
The screw depth can be adjusted continuously and allows screws to be countersunk until flush. The rear aluminium ring can be used to "lock" the configured position. As a result, the screw depth is not adjusted.
Field of Application:
Dry walling, interior finishing
Advantages:
An O-ring is located in the front aluminium sleeve. This prevents the ingress of dust into the chuck. As a result, it takes a little more effort to insert the bit into the chuck.
The best way is to remove the front aluminium sleeve, insert the bit into the chuck and screw the sleeve back on.
Type:
with magnet
Advice:
Suitable for 1/4 inch bits with hexagon head drive.
Suitable for power screwdrivers with a chuck conforming to DIN ISO 1173-F6.3.
Datasheets(X)
Drive | 1/4 inch |
Adapter type | 1/4 inch, E 6.3 |
Length | 50.0 mm |
Type | with magnet |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!