Hammerset anchor E, steel, galvanised
Hammerset anchor ED stainless steel, zinc-plated, M 12x50 D
Ideal for attaching diamond drills and saw blades to concrete
Art.-no.
090481216
EAN 4029484432721
Prices for customers after login
Exclusively for trade customers
Register now and access more than 15,000 products
Ideal for attaching diamond drills and saw blades to concrete
Application area:
For attaching diamond drills and saw blades to concrete
Advantages:
- Solid wall plug body with 16 mm external diameter
- Very heavy load due to large steel cross-section
- Hammerset anchor with increased steel failure load
- Greater safety margins when anchoring core drills
- For recommended loads, see EM 12 hammerset anchor (permissible loads)
- For use with expander tool E-SW 12
Advice:
- It is essential to observe drill hole depth and drill hole diameter
- Drive the cone in using the expander tool until the setting tool makes contact with the wall plug body
- Minimum screw length = component thickness + minimum screw-in depth
- Maximum screw length = component thickness + thread depth.
Product information
Datasheets(X)
Type description | ED M12 D |
Anchor diameter x anchor length (l) | 16 x 54 mm |
Nominal drill-bit diameter (d 0) | 16 mm |
Anchor length (l) | 54 mm |
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 16 mm |
Min. edge clearance (c min) | 165 mm |
Min. centre-to-centre distance (s min) | 120 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!